Teledyne LeCroy IBTracer 4X - Users Manual Ver.2.20 - Manual (Page 108)

100
IBTracer 4X Protocol Analyzer User’s Manual CATC SW Version 2.2
Or
Select a value from the drop-down list.
Step 3
Click OK.
The Trace repositions to show the packet at the top of the screen.
Go to Marker
To instruct the analyzer to display a marked packet,
Step 1
Select Go to Marker under Search on the Menu Bar.
You see a menu listing the marked packets in that Trace View:
Step 2
Select the desired packet from the displayed list.
The Trace repositions to show the packet at the top of your screen.
Note The Go to Marker feature functions in conjunction with the Set
Marker feature. The comments within the parentheses
following each marked packet are added or edited with the Set
Marker feature.
Go to
The Go To feature takes you directly to an event in a Trace.
Step 1 Select Go To under Search on the Menu Bar.