Teledyne LeCroy IBTracer 4X - Users Manual Ver.2.20 - Manual (Page 25)

17
IBTracer 4X Protocol Analyzer User’s Manual CATC SW Version 2.2
Step 2
Power-on the USBTracer Analyzer.
Step 3 Connect the USB cable to the rear of the analyzer and to the personal
computer.
The host operating system detects the Analyzer and begins to install
the USB driver.
Note
When Windows prompts you for a file, browse to the CATC CD.
If this is a first time installation, the ctcupa10.sys (UPAS) and
ib4trcer.sys (USB) drivers must also be installed.
Installing the USBTracer Application Program
Run setup.exe from the USBTracer CD-ROM.
The CATC USBTracer Install Wizard automatically installs the necessary
files to the computer’s hard drive. USBTracer software is installed in the
C:\Program Files\CATC\IBTracer directory unless you specify otherwise.
Follow the installation instructions on your screen.
3.9 IBTracer Program Startup
You can start the IBTracer program from the desktop or from the installed
directory. The program always begins with its main screen active: