Teledyne LeCroy IBTracer 4X - Users Manual Ver.2.20 - Manual (Page 116)

108
IBTracer 4X Protocol Analyzer User’s Manual CATC SW Version 2.2
10.2 Displaying Raw 10b Codes
To view Raw 10b Codes, left-click on the
first cell in a packet and select Show Raw
10b Codes from the pop-up menu shown
on the right. After you have made your
selection, one of two windows will display
depending on whether the trace under
review was created with IBTracer 4x or
IBTracer (1x).
Raw 10b Codes on traces made by IBTracer 4x
In traces created by IBTracer 4x, the 10b Codes window is laid out with
packets as rows and physical lanes as columns. In 4x recordings, all four
lanes will show data. In 1x recordings, only one column will show data.
The other columns will read "Not Used."
Data Appearance - Data format is configurable. To change data format,
select from the four options:
• Byte Value - Click to show hex values.
• 10 bit code - Click the to show hex values.
• Symbol (RD) - Click to show symbol RD fields.
• Packet Fields - Click to show packet fields.
Navigation - To move to the previous or next packet in the trace, click one
of the two Packet buttons at the bottom of the window:
• Prev - Displays data for the previous packet in the trace.
• Next - Moves to the next packet in the trace.