Teledyne LeCroy IBTracer 4X - Users Manual Ver.2.20 - Manual (Page 26)

18
IBTracer 4X Protocol Analyzer User’s Manual CATC SW Version 2.2
When the program is used with the USBTracer Protocol Analyzer attached
to the computer, you can set trigger conditions, record, monitor, and analyze
the activity of your InfiniBand device or fabric. When used without the
Analyzer, the software serves as a Trace Viewer for viewing traces made on
other systems.
3.10 Making a Recording
After installation, the software is configured to make a Snapshot recording
of InfiniBand traffic.
To make your first recording of this traffic,
Step 1
Connect InfiniBand cables to both InfiniBand connectors on the
front panel of the IBTracer 4X module and plug the other ends into
the device under test.
Step 2
Cause the device under test to generate InfiniBand traffic.
Step 3
Click on the Tool Bar.
After 16 Mbytes of traffic is recorded, the analyzer will upload the
data and display the packets.
To terminate the recording before Inquiry timeout occurs,
Step 4
Click on the Tool Bar at any time before recording
automatically terminates.
When the recording session is finished, the traffic is saved to the
hard drive as a file named data.ibt or whatever name you assign as
the default filename.
To save a current recording for future reference,
Step 5
Select Save As under File on the Menu Bar.
OR
Click on the Tool Bar.
You see the standard Save As screen.
Step 6
Give the recording a unique name and save it to the appropriate
directory.