Teledyne LeCroy IBTracer 4X - Users Manual Ver.2.20 - Manual (Page 11)

3
IBTracer 4X Protocol Analyzer User’s Manual CATC SW Version 2.2
1.2 Features
General
• Upgradeable firmware and recording engine
• Software operates stand-alone on any Microsoft Windows 98SE or later
computer as a "Trace Viewer"
• Link and data packets are displayed and fully decoded
• Training sequences are displayed
• Transport level functions are fully decoded with a graphical illustration
of the comprised packets and messages
• Errors at the physical, link, and transport levels are highlighted in red
• Online help
Physical Components
• IBTracer 4X plug-in module
• UPAS/IBTracer 4X can be administered by any desktop or portable
Microsoft Windows-based computer with USB capability
• Convenient Plug-and-Play USB installation
• Taps non-intrusively between two 10 Gbit/sec InfiniBand ports using
two standard cables
• External interface for probing and monitoring auxiliary digital signals
and for cross triggering between other test instruments
Recording Options
• Record up to 2 Gbyte of InfiniBand data, timing and control information
• Three recording modes: Snapshot, Manual Trigger, and Event Trigger
• Selectable recording buffer size and trigger position
• Record the full data rate of a single 4X, 10 Gbit/sec InfiniBand link
• Trigger on InfiniBand conditions like link training sequences or power
off disconnect events
• Trigger on a comprehensive list of error conditions, such as running
disparity, bad packets, or bad variant or invariant CRCs
• Trigger on a sequence of packets to capture messages and transport level
events
• Optionally filter captured data
• Breakout board data
• Counters