Teledyne LeCroy IBTracer 4X - Users Manual Ver.2.20 - Manual (Page 40)

32
IBTracer 4X Protocol Analyzer User’s Manual CATC SW Version 2.2
5.3 Status Bar
The Status Bar is located at the bottom of the main display window.
Depending on the current activity, the bar can be divided into as many as
four segments.
Recording Progress
When you begin recording, the left-most segment of the Status Bar displays
a Recording Progress Indicator:
As recording progresses, the Progress Indicator changes to reflect the
recording progress graphically:
• In the Progress Indicator, a black vertical line illustrates the
location of the Trigger Position you selected in Recording
Options.
— Pre-Trigger progress is displayed in the field to the left of the
Trigger Position in the before-Trigger color specified in the
Display Options.
— When the Trigger Position is reached, the progress indicator
wiggles as it waits for the trigger.
— After the trigger occurs, the field to the right of the Trigger
Position fills in the post-Trigger color specified in the Display
Options.
— When recording is complete, the upper half of the progress
indicator fills in white, indicating the progress of the data
upload to the host computer.
You should be aware of two exceptional conditions:
• If a Trigger event occurs during the before-Trigger recording, the
before-Trigger color changes to the after-Trigger color to indicate
that not all the expected data was recorded pre-Trigger.