Teledyne LeCroy IBTracer 4X - Users Manual Ver.2.20 - Manual (Page 77)

69
IBTracer 4X Protocol Analyzer User’s Manual CATC SW Version 2.2
Click on the Tool Bar.
Your recording session can continue until it has finished naturally or you
may need to stop manually by clicking
on the Tool Bar, depending on
how you set the Recording Options.
To manually stop recording,
Step 2 Select Record >Stop from the Menu Bar
OR
Click on the Tool Bar.
Note The manual Stop Recording feature is primarily of use when
recording low-volume traffic, which can take a long time to fill
the recording buffer.
When the recording is finished, the traffic is uploaded to the hard drive and
then saved as a file named data.ibt or whatever name you assign as the
default filename.
To save a current recording for future reference,
Step 3
Select File >Save As from the Menu Bar.
OR
Click on the Tool Bar.
You see the standard Save As screen.
Step 4
Give the recording a unique name and save it to the appropriate
directory.
6.16 Training Retry
To initiate a training retry, click the button. Use this feature when you
are unable to establish a connection or an active link. You should also use
this feature when changing the recording speed (Recording Options >
Miscellaneous > 1x/4x Mode). The analyzer can only switch modes after
has detected a Disconnect event on the link.