Teledyne LeCroy IBTracer 4X - Users Manual Ver.2.20 - Manual (Page 75)

67
IBTracer 4X Protocol Analyzer User’s Manual CATC SW Version 2.2
6.13 Restarting Sequences and Counters
The Restart button is used to create conditional statements with sequences
and counts.
When an event is linked to the Restart button, the Analyzer
restarts any counting or sequencing it is performing if that
event is found.
Restarting a Sequence
For example, in the illustration below the Analyzer is told: "Trigger
following a sequence of a MAD, a packet with an Immediate Data pattern,
followed by a packet with a Local Routing Header (LRH). However, if an
error occurs during the sequence, restart the search."
Restarting a Count
The Restart button can be used to restart counting. If an Event count has
been defined, adding a link between another event and the Restart button
tells the analyzer to restart the count any time the Restart event has been
found. This is best explained with an example. In the screenshot below, the