Teledyne LeCroy SierraNet M168 User Manual Ver.1.50 - Manual (Page 107)

SierraNet M168 User Manual 105
Trigger and Filter Settings in Easy Mode Teledyne LeCroy
 iSCSI Logout Request
 iSCSI NOP‐Out
 iSCSI SNACK request
 iSCSI Task Mgmt Request
 iSCSI Text Request
Target PDU
The dialogs are similar to the Initiator PDU above. The patterns available are:
 iSCSI Asynchronous Message
 iSCSI Response
 iSCSI Data‐In
 iSCSI Login Response
 iSCSI Logout Response
 iSCSI Nop‐In
 iSCSI Ready to Transfer
 iSCSI Reject
 iSCSI Task Mgmt Request
 iSCSI Text Request
ISCSI Cmd
Any SCSI Command
Double‐click 6‐Byte Any SCSI Cmd to open the dialog.
Figure 2.70: 6-Byte Any SCSI Cmd Dialog
Enter the values for the Ether header, IP Header and the count of the expected number of
occurrences. Check the Check All box to select ports P1 through P8 or individually select
ports.