Teledyne LeCroy Merlin - Users Manual - Manual (Page 33)

25
Merlin Protocol Analyzer User’s Manual CATC SW Version 2.0
3. Updates
Whenever new software is installed, it is possible that the Firmware and/or
BusEngine will also need updating. Updates can be performed two ways:
either automatically or manually. This chapter describes both procedures.
This chapter also describes how to update Merlin software.
3.1 Software, Firmware, and BusEngine Revisions
The Readme.htm or Readme.txt file on the installation CD and in the
installed directory gives last-minute updates about the current release.
Included with each release are the most recent downloadable images of the
Firmware and the BusEngine. The Readme file lists the latest versions and
informs you if the Firmware or BusEngine needs to be updated.
You can check the current version of the analyzer software, Firmware, and
BusEngine by selecting:
• Help > About Merlin… from the menu.
You see this screen:
Note The Firmware and BusEngine information will not display if the analyzer is not
connected to its PC or if the analyzer has just booted up and is still in the process
of completing its self diagnostics.
The About Merlin box shown above details revisions of the following
software and hardware:
• Merlin Software Version
• Merlin Firmware Version
• BusEngine Version
• Unit Serial Number
Note When contacting CATC for technical support, please have available all the
revisions reported in the About Merlin window.