Staub Electronics WPS-100-DVR-4CH WIREPATH - 4 CHANNEL DVR W_500GB HDD - Manual (Page 32)

32
WPS-100-DVR-4CH Installation and Users Manual
6.2 PASSWORD SETUP
The Password SetupDOORZVWKHDGPLQLVWUDWRUWRDGGQHZXVHUVGHOHWHH[LVWLQJXVHUVDQGRUPRGLI\WKHXVHU
QDPHVSDVVZRUGDQGOHYHOVRIDFFHVV
In the Setup MenuGLVSOD\SUHVVʆʈʉʇRQWKHUHPRWHWRFKDQJHWKHhighlighted option to PasswordDQG
then press ENTER to display Password Setup as shown.
The DVR allows up to 18 user accounts. There are three default user levels in the system:
‡2SHUDWRU²7KHORZHVWOHYHODQ2SHUDWRUFDQRQO\YLHZOLYHYLGHRDQGDXGLR
‡6XSHUYLVRU²,QDGGLWLRQWROLYHYLGHRYLHZLQJD6XSHUYLVRUFDQUHYLHZSOD\EDFNYLGHRDQGDXGLRDQG
KDVSHUPLVVLRQWRDUFKLYHÀOHV
‡$GPLQLVWUDWRU– The highest level is Administrator and has access to all options.
,QDGGLWLRQWRWKHWKUHHGHIDXOWOHYHOVDQDGPLQLVWUDWRUFDQDOVRVHWCustomized levels of access as described in
the following paragraphs.
THE FACTORY PRESET ADMINISTRATOR LEVEL LOGIN NAME IS user, THE PASSWORD IS 1234
To navigate and operate this menu:
‡ʆʈʉʇ
3UHVVWKHVHEXWWRQVRQWKHUHPRWHFRQWUROWRVHOHFWDQLWHP$OWHUQDWLYHO\XVH
the mouse to select an item.
‡02'(
Press the Mode button on the remote control to select a user as the default at login. An asterisk ( * ) will be
shown preceding the number for the default login user. This user’s login name and password will be the
default credentials populated in the Login/Logout dialog box so the user doesn’t have to enter text to login
the system. This feature is enabled by default. Press the Mode button to deselect the user as the default
ORJLQXVHU$OWHUQDWLYHO\XVHWKHPRXVHWRVHOHFWDQGGHVHOHFWGHIDXOWORJLQXVHUV
WARNING – This feature could allow unwarranted access to the DVR. Caution is strongly advised when
enabling this feature. Setting a default login means that the user name and password will automatically
populate the Login/Logout box. This could leave the system vulnerable to unauthorized use. It is
recommended to deselect a default login so users are required to provide credentials to access the DVR.
‡(6&