IAI America IA-T-XA (ANSI standard CE mark agreement) - Manual (Page 64)

㽳 Movement
The actuator is moved to the location of the position data transferred to the controller.
Select the position No. you want to move in a Teac
screen condition and press the return key.
Turn on the servo for the axis to be moved. (It is not
required if the axis is already in a servo ON
condition.)
Press the MOVE key to light up the MOVE status
display LED.
Pressing the axis operation key with the axis No. for
movement begins axis movement. (When moving
the axis No. 1, press the 1+ or 1- key.)
When the servo is ON for all axes, pressing the
ALL+ or ALL- key begins axis movement.
When movement starts, the MOVE status display
LED goes out. When movement is completed, the
JOG status display LED lights up. (The mode moves
to the JOG operation mode.)
Movement procedures
Position No. + return
When moving on an axis basis continuously, press the MOVE key to light up the MOVE status
display LED and press the axis operation key with the axis No. every time.
61