IAI America IA-T-XA (ANSI standard CE mark agreement) - Manual (Page 58)

㽴 Servo ON/OFF
The axial servo ON/OFF is executed on an axis basis or for all axes simultaneously on the Teac
screen.
Press the SERVO key to light up the SERVO status
display LED.
Press the plus (+) axis operation key with the axis
No. for servo ON. (When turning the servo ON for
the Axis No. 1, press the 1+ key.) When turning off
the servo, press the minus (-) axis operation key with
the axis No. When turning on the servo for all axes
at a time, press the ALL+ key. When turning off the
servo for all axes at a time, press the ALL- key.
When servo-ON or servo-OFF is executed once, the
SERVO status display LED goes out and the JOG
status display LED lights up.
Servo ON/OFF procedures
For Servo ON
For Servo OFF
When executing servo-ON or servo-OFF on an axis basis continuously, press the SERVO key to
light up the SERVO status display LED and press the axis operation key with the axis No. every
time.
N: Servo ON
F: Servo OFF
55