IAI America IA-T-XA (ANSI standard CE mark agreement) - Manual (Page 134)

㽴 Servo ON
Press the F1 (OK) key.
㽵 Home position return
Press the F1 (OK) key.
㽶 Servo OFF
The absolute encoder with the driver CPU Ver.
0.23 or later can be reset in a servo ON condition.
Press the PAGE UP key without pressing the F1
(OK) key to move to the following “
㽷 Encoder
multi-rotation data reset (2).”
㽷 Encoder multi-rotation data reset (2)
Press the F1 (OK) key.
131