IAI America DS-S-T1 - Manual (Page 55)

Page 53
10. Explanation on Each Function Screen
F1 F2 F3 F4
F1 F2 F3 F4
F1 F2 F3 F4
Wrt Jvel Jog Etc
F1 F2 F3 F4
Svof - 2 No 1 [1] - 2
48.593 99.625
Vel [ 0 ] Acc [ 0.00]
Jog - 1 No 2 [2 ] - 2
18.625 7. 510
Vel [ 0 ] ACC [0.00 ]
Wrt Axis Clr
Jvel
Jog
Etc
Teac
Wrt
Jvel
Jog
Etc
Svof
Teaching Velocity Set Mode
* The maximum value varies according to machine
type. Therefore, please refer to the appropriate
product catalog.
Axis+
Axis-
Etc
Prog Wrt
Axis
Clr
Wrt
Jvel
Svof
Etc
Servo OFF Mode
↵
Wrt
Jvel
Jog
Axis+
Axis-
Vel
Etc
* The maximum value varies according to machine
type. Therefore, please refer to the appropriate
product catalog.
Prog
Wrt
Jvel
Jog
Etc
Axis+
Axis-
Vel
Etc
Wrt
Axis
Clr
Set the velocity • acceleration, and press the Return Key.
F1 Key (Wrt): Writes to memory.
F2 Key (Axis): To Axis Change Mode Screen
F3 Key (Cir): Clears the input number, and inputs the number once
again.
Svof - 1 No 1 [1] - 2
59.729 99.625
Wrt Jvel Jog Etc
Manually operate the actuator to move the axis position,
and then, write in using the F1 Key (wrt). Each time the F1
Key is pressed, the Position No. advances.
Svof - 1 No 1 [1] - 2
48.593 99.625
You may select the velocity set • axis No.
Wrt Axis Clr
Set the velocity • acceleration, and press the Return Key.
F1 Key (Wrt): Writes to memory.
F2 Key (Axis): To Axis Change Mode Screen
F3 Key (Clr): Clears the input number, and inputs the number once
again.
Vel
Svof
Etc