IAI America DS-S-T1 - Manual (Page 33)

Page 31
F1 F2 F3 F4
F1 F2 F3 F4
Edit 2-1 [ 0]
F1 F2 F3 F4
Mode Select
Edit 1-10 [ 9]
8. Examples of Simple Operation Procedure
Edit 1-10 [ 9]
_
F1 F2 F3 F4
[Continuation from P.30]
Press the ESC Key to execute Step No. Input Mode.
(To verify each step, either do a direct number input into
Step No. during this screen. Or use the F1 Key (Inc) and
F2 Key (DEC) to observe the Step No. you wish to verify.
By pressing the ESC Key once more will change the
screen into Program No. Input Mode Screen. Therefore,
either do a direct number, or by pressing the F1 Key (Inc),
the Program No.will turn into 2, allowing you to create
another program.
The Mode Selection Screen will return by continuously
pressing the ESC key.
EDSR EOR EXIT EXPG
Inc Dec Clr Etc
Inc Dec Clr Etc
Prog Play Parm Test
8.2-2 How to input another program as a continuation
* To turn Mode Selection Screen into Program No. Input Mode Screen, please refer to Page 23 and on. Use the program No.
Input Mode Screen to verify that the cursor is at the Program No. location. Then, either press the F1 Key or do an direct
number input. Make sure that other programs can be input into the screen so that new programs can be created.