SKC 210-1000 Pocket Pump - Manual (Page 16)

14
Setup
To change the temperature scale display:
• In enhanced display and with the pump running, press:
[] to place in HOLD,  to enter Setup, and []
Press  to scroll to the temperature display. The display will show the newly
selected temperature scale.
To select the pressure units display:
• In enhanced display, back pressure can be shown in either inches (ins) of water
or millimeters (mm) of mercury. Use the  button to scroll to the back pressure
display units.
To change the back pressure units display:
• In enhanced display and with the pump running, press:
[] to place in HOLD,  to enter Setup, and []
Press  to scroll to the pressure display. The display will show the newly
selected pressure unit.
Underlined keypad butt on sequences indicate that the butt ons must be
pressed in sequence within 10 seconds of the previous command.
Bracketed keypad butt on sequences indicate that butt ons must be pressed
simultaneously.