SKC 210-1000 Pocket Pump - Manual (Page 15)

13
Setup
To change pump operating mode (constant fl ow or constant
pressure):
• With the pump running, press:
[] to place in HOLD,  to enter Setup, and 
The display will now show the new operating mode.
For information on operating the pump in constant pressure mode,
see Advanced Operation on page 21.
To determine the pump display:
• Standard display includes fl ow, volume, and run time. Press  to scroll
through run time data.
• Enhanced Display includes fl ow, volume, back pressure, temperature, and
run time. Press  to scroll through run time data.
To select the pump display:
• Standard to Enhanced Display:
With the pump running, press:
[] to place in HOLD,  to enter Setup, and

The enhanced data display will include fl ow, volume, back pressure, temperature,
and run time.
• Enhanced to Standard Display:
With pump running, press:
[] to place in HOLD,  to enter Setup, and 
The standard data display will include fl ow, volume, and run time.
To select the temperature scale display:
• In enhanced display, the temperature of incoming air can be shown in either
Celsius (C) or Fahrenheit (F). Use the  button to scroll to the temperature
scale display units.