SKC 210-1000 Pocket Pump - Manual (Page 12)

10
Setup
Operating the Keypad
The Pocket Pump operates by pressing
various sequences of the three keypad
buttons located beneath the sliding cover.
Operate the Pocket Pump with the follow-
ing key sequences:
Star Button 
• Scrolls through run time data and setup options displayed on the LCD
Up and Down Arrow Buttons  
• Toggle between display units and increase or decrease sampling parameters
in setup
Underlined Sequence (Security Code)
• Press buttons in sequence within 10 seconds of the previous command.
• Pocket Pump operating parameters cannot be changed without pressing the
security code sequence.
• The security code may be required at various points during program-
ming.
Bracketed [  ]
• Press buttons simultaneously.
Butt on sequences are shown in
the order in which the butt ons
should be pressed.
Pocket Pump Keypad
Pressing both the up and down
arrow butt ons simultaneously
places a running pump in
HOLD or a holding pump in
RUN.