SecurityMan NDVR-04 - Manual (Page 30)

30 Network Viewer software
In the save to AVI window, select a save to location and give it a file name. Next select any
combination of channels ranging from 1-4 to save and click OK to proceed. A blue LED located in the
Lower-Right hand corner will appear. To stop AVI recording simply press on the “Save As AVI…” again.
Please note, AVI playbacks require window media and the playback speed will be 3 to 4 times faster
than the actual speed of the original recording. The Netviewer software cannot be used to playback
AVI files.
To save video streaming to local hard drive: Click on the "Save Video Stream to PC's HDD" to start to
save the video to local hard drive. A green LED located at the Lower-Right hand corner will appear. To
stop saving to local hard drive, simply press the “Save Video Stream to PC’s HDD” and the green light
will disappear and grayed out from the Lower-Right hand corner of Network Viewer.
Note: The “Save Video Stream to PC’s HDD” saves video format as .dvr which can only be playback
using the “File Play” tab from the Netviewer software. The .dvr video saved to location setting can be
change in the Netviewer setting under the “Local Rec Path”