SecurityMan NDVR-04 - Manual (Page 17)

17
NEW PASSWORD
In the SYSTEM SETUP menu, select NEW PASSWORD. Use the directional buttons FORWARD/
REVERSE to change value of the password. Use the Up/Down buttons to toggle between the first
and the fourth digit setting. After changing from the manufacture default password, please
remember the newly created password or jot them down and place it in a secure area.
VIDEO SET
Press the MENU button to enter SETUP MODE. Select VIDEO SET from the list, and press ENTER to
access the video setting pages as shown below.
In the VIDEO SETUP menu, select NAME SETUP and press ENTER. Press the UP/DOWN buttons
to select one of the 4 channels, and then press ENTER to rename. Use the FORWARD/REVERSE
buttons to change the alphabet letter charactors. There is a maximum of 8 letters/numbers entries per
channel. Press the ENTER/OK after completion or browse down to display by pressing the UP/
DOWN buttons and FORWARD/REVERSE to switch between name display ON/OFF.
When finished, press MENU/ESC to return to VIDEO SETUP menu.
On Screen Display Functions
SYSTEM SETUP
IME/DATE SET [ ◎ T ]
DD FORMAT SET [ ◎ H ]
UTO SEQUENCE SE ◎ A T [ ]
◎ FACTORY RESET [ ]
◎ PLAY REPEA
◎ VIDEO SOU
T: NO
RCE: PAL
◎ BUZZER SOUND: N O
◎ PASSWORD ENA: OFF
◎ NEW PASSWORD: 0000
--------------------------------------- ---- --- ---------------
ENTER SET ↑↓← → EXIT
SET
◎ SYSTEM SET [
UP MODE
]
◎ VIDEO SET [ ]
◎ RECORD SET [ ]
◎ NETWORK SET [ ]
◎ SENSOR SET [ ]
VIDEO SETUP
◎ NAME SETUP [ ]
◎ BRI / CON SET [ ]
◎ BOUNDARY: WHITE
◎ BACKGROUND: BLUE
--------------------- -----------------
↑↓← → EXIT
-----------------------
ENTER SET ◎ BACKUP SET [ ]
◎ SCHEDULE S T [ E ]
--------------------------- -------------------------- ---
ENTER SET
-----
↑↓← → EXIT
NAME SETUP
NAME SETUP
- CH1: C A M 1 _ _ _ _
- CH2: C A M 2 _ _ _ _
- CH3: C A M 3 _ _ _ _
- CH4: C A M 4 _ _ _ _
- DISPLAY: ON
◎ LANGUAGE: English