beautypg.com

On screen display functions buzzer sound, Password ena – SecurityMan NDVR-04 User Manual

Page 16

background image

16

In the SYSTEM SETUP menu, select BUZZER SOUND. Press FORWARD /REVERSE button to

change the buzzer sound ON or OFF. Press MENU/ESC to return to SETUP MODE.

If the video standard setting is not set up correctly, resetting the DVR is required to default back to

NTSC standard. To default: turn off the DVR, press and hold the USB_BACKUP button located in the

front panel of the DVR. While pressing and holding down the USB_BACKUP button, turn the power of

the DVR on. Kept holding the USB_BACKUP button for 5 seconds and then release it. After the release

of the USB_BACKUP button, restart the DVR using the power switch located one the rear of the DVR.

On Screen Display Functions

BUZZER SOUND

S

YSTEM SETUP

TIME/DATE SET [

]

HDD FORMAT SET [

]

AUTO SEQUENCE SET

[

]

FACTORY RESET [

]

NO

E

PLAY REPEAT:

VIDEO SOURC : PAL

BUZZER SOUND: N

O

F

---------------

PASSWORD ENA: OF

NEW PASSWORD: 0000

--------------------------------------- ----

---

ENTER SET ↑↓← → EXIT

PASSWORD ENA

In the SYSTEM SETUP menu, select PASSWORD ENA to enable or disable the DVR password

protection. Press the FORWARD/REVERSE button accordingly will turn ON/OFF the password

protection feature. When the password it set ON, the DVR will request for password whenever

the MENU button are pressed or to stop recording.

The factory default password is 0000. Press MENU/ESC to return to SETUP MODE menu or

simply browse up and down by pressing the UP/DOWN arrow keys.

SYSTEM SE

TIME/DA

TUP

TE SET [

]

HDD FORMAT SET [

]

QUENCE SET [

AUTO SE

]

FACTORY RESET [

]

NO

E

O

PLAY REPEAT:

VIDEO SOURC : PAL

BUZZER SOUND: N

PASSWORD ENA: OFF

---------------

NEW PASSWORD: 0000

--------------------------------------- ----

---

ENTER SET ↑↓← → EXIT

SYSTEM SETUP

TIME/DATE SET [

]

HDD FORMAT SET [

]

AUTO SEQUENCE SET [

]

ET [

FACTORY RES

]

PLAY REPEAT: NO

VIDEO SOURCE: PA

BUZZER SOUND: ON

L

---------------------------

PASSWORD ENA: OFF

NEW PASSWORD: 0000

----------------------------------

ENTER SET ↑↓← → EXIT

This manual is related to the following products: