SecurityMan NDVR-04 - Manual (Page 13)

13
Basic Operation
Select TIME/DATE SEARCH to search for specific time/date by inputting the
MM/YYYY HH: MM into the search, the search engine will start to search for the specified
time and date.
START: MM / DD / YYYY HH: MM ( start/earliest date/time that exists in the hard drive)
END: MM / DD / YYYY HH: MM ( End/last date/time that exist in the hard drive)
M M / D D / Y Y Y Y H H : M M (this date/time area is adjustable for search). Press the Forward/
Reverse button to select column digits and press UP/DOWN to change the value. Press
the ENTER button to start playback.
NOTE: Playback speed can be change with the Forward/Reverse button. The speed
can be of x1, x2, x4, x8, x16 times for rewind and x1, x2, x4, x8, x16, x32 times for fast
forward.
Press the MENU button to enter the SETUP MODE, a variety of menu entities will appear as shown below:
Press the UP/DOWN buttons to highlight selection and press ENTER to confimr selection and the
sub-menu will appear. Press the MENU button to return to the previous screen or to exit from
the setup mode.
:
On Screen Display Functions
SETUP MODE
◎
SYSTEM SET [ ]
□ VIDEO SET [ ]
□ RECORD SET [ ]
ET [ □ NETWORK S ]
□ SENSOR SET [ ]
□ BACKUP SET [ ]
□ SCHEDULE SET [ ]
SYSTEM SET
Press the MENU button to enter SETUP MODE. Choose SYSTEM SET and press ENTER to
access the sub-menu display as illustrated below.
SYSTEM SETUP
SETUP MODE
◎
SYSTEM SET [ ]
□ VIDEO SET [ ]
◎ TIME/DATE SET [ ]
□ HDD FORMAT SET [ ]
□ AUTO SEQUENCE SET [ ]
ET [
□ RECORD SET [ ]
ET [
□ FACTORY RES ]
---------------------------
□ PLAY REPEAT: NO
□ VIDEO SOURCE: PAL
□ BUZZER SOUND: ON
□ NETWORK S ]
□ SENSOR SET [ ]
□ BACKUP SET [ ]
□ SCHEDULE SET [
□ PASSWORD ENA: OFF
□ NEW PASSWORD: 0000
----------------------------------
ENTER SET ↑↓← → EXIT
]
--- ------------------------- ----------------------------- ----
ENTER SET ↑↓← → EXIT