Securitron PB2E - Manual (Page 2)

PN# 500-11500
Page 2 Rev. E, 06/11
POWER
SUPPLY
TIMEMATE
+
YELLOW
RED
WHITE
BLACK
D.C. LOCK
FAIL SAFE
GREEN
PB2E
+
POWER
SUPPLY
+
D.C. LOCK
ELECTRIC
PB2E
+ NO
NC + IF FAIL SAFE
IF FAIL SECURE
MOMENTARY RELEASE OF FAIL SAFE OR FAIL SECURE ELECTRIC LOCK
TIMED DOUBLE BREAK RELEASE OF FAIL SAFE LOCK
COM
NO
NC
COM
5. ALTERNATE LENS CHANGING
The pushbutton is factory shipped with the green lens set installed and two lens/insert options.
Changing to the other lens sets is simple.
1) Grasp keyplate and turn over. From the back rotate the white contact block of the switch
counter-clockwise to the 11 o’clock position and pull straight back to remove the contact
block.
2) With a slender smooth ended object such as a marker pen, slide it inside the switch body
until it stops against the back of the lens. Place the object that is inside the switch body on a
smooth surface with the keyplate on top, and tap the keyplate up and down on the object to
pop the lens off. Remove the lens and insert.
3) Turn the keyplate over and place the new insert onto front of switch, confirm that the text on
the insert is correct reading to the keyplate and place the matching colour lens on top of the
insert and compress around all edges of the lens until it snaps in place. Depress lens several
more times to ensure smooth operation and that the lens is not binding.
4) With the terminals upward insert the contact block back into the back of the switch at the 11
o’clock position and rotate clockwise until it stops straight up and down.