RECON 26419 Xenon Strobe Light Kit - Manual (Page 7)

‐
With The Cable Ready, Connect The Strobe To The Clip Matching The
Colors On Each Side.
‐
Using A Sealant, Apply A Liberal Amount To Protect Exposed Connectors
On the Back Side Of EACH Clip. (2 Per Strobe)
‐
Install Tail Lamp Back Into Vehicle.
‐
Following The Same Steps, Install Cables and Strobes In the Front.
Into The Cabin
‐
Locate The Desired Area To Mount & Install The Recon Power Supply.
*** Application Will Vary Per Vehicle. It Is VERY IMPORTANT To Secure Power
Supply To The Body or Frame Of The Vehicle, As It is Crucial To The Performance Of
This Product To Be Grounded.
‐
In This Install We Will be Mounting The Power Supply Under The Driver
Seat. Remove The Front Seat & and Trim Around Space To Expose A
Workable Area.