RECON LED Tailgate Bar 26416 - Manual

RECON Fire & Ice LED Tailgate Bar - Supplemental Reverse Light Wiring Instructions – 0406 v1
Supplemental Instruction Sheet for Installing LED Tailgate Bar with
White Reverse Lights (Hard Wiring Instructions)
Once you have followed the instructions on the first installation instruction
sheet, simply hard wire (aka splice) the white wire coming out of the RECON
LED tailgate bar directly to the postive wire of your drivers side reverse light.
This wire can be found by simply removing your drivers tail light lens and
following the two wires for the reverse light. The negative is typically black.
Splice into the other wire which is the positive wire.
If you have any questions, feel free to contact us:
[email protected] - www.GoRecon.com