RECON 26419 Xenon Strobe Light Kit User Manual
Page 3
Find The Best Location To Mount The Strobes
‐
Locate The Area Where You Will Drill The 1” Hole For The Strobe(s)
*** You Are Required To Have At Least 1” of Room Around All Sides Of The
Strobe Element. Failure To Leave Room May Cause Fire or Severe Damage
To Components During Operation. ***
‐
Using A 1” Inch Hole Saw Drill The Whole In The Housing In The
Predetermined Area.
‐
Once Drilled, Be Sure To Removed Plastic Shavings That Have Fallen Into
The Housing.
*** Mishandling Strobe Can and Will Cause Damage To The Element, Be
Sure To Use Care While Working With The Product. ***
‐
Remove 1 Strobe and Hardware Out Of Package.
‐
Place Orange Grommet On The Bulb Side Of The Strobe & Align The 2
Screw Holes.