RECON 26421 LED Strobes - Manual

WHITE RED AMBER BLUE GREEN
LED COLOR
CHROME BLACK
FLANGE COLOR
BLACK
RED
YELLOW
To +VDC (fuse @ 3A)
To Chassis Ground
For Synchronization & Flash Patterns
Group1 Heads: (Wiring- WHITE connected to RED) will flash together
Group2 Heads: (Wiring- WHITE not connected to RED) will flash together
*Group1 Heads will alternate with Group2 Heads*
Connect YELLOW wires of all heads together for synchronization
*All heads must be set at the same pattern
For Simultaneous or Alternating Flash
FLASH PATTERN
0 Random
8 8 Flash
1 Steady
2 Single
3 Mega
4 Double
5 Triple
7 Quint
6 Quad
9 Single-Quad
10 Single H/L
11 Single-Triple-Quint
Momentarily apply +VDC
to YELLOW wire:
ȅonce for next pattern
ȅquickly three times for reset
Note: This unit is not factory set at pattern 0
SCREWS
LIGHTHEAD
FLANGE
FOAM RUBBER
24 VDC 12 VDC
090320