RECON 264123BK & CL 3rd Brake Lamp (Ford F-150 1997-2003) User Manual
RECON For the car

LED 3
rd
Brake Lamp with Cargo Lights (Hard Wiring Instructions)
1. Please reference the table below to determine where the wires coming out of the back of your
new RECON LED 3
rd
Brake Lamp are to be connected on your truck:
Wire # Color
Connection Point
1
White & Black Wire
Connect to positive 12V for cargo light
2
Solid Black Wire
Connect to ground for cargo light
3
Solid Red Wire
Connect to positive 12V for brake light
4
Solid Black Wire
Connect to ground for brake light
2. There are two options to properly connect the RECON LED 3
rd
Brake Lamp to your O.E. wires
if you do not want to simply plug the RECON LED 3
rd
Brake Lamp into your O.E. plug or if
after plugging it in the RECON LED 3
rd
brake light doesn’t work properly:
Option 1: Cut off your O.E. connector plug, and connect the wires of your new RECON LED 3
rd
Brake Lamp to your O.E. wires as depicted in the chart above.
Option 2: If you want to retain your O.E. connector plug, you must splice the wires a few inches
before the O.E. connector plug by peeling back the O.E. wire covering/insulation.
4. If your vehicle has only 3 wires going into your O.E. connector plug, then please connect the
No.2 and No.4 wires coming out of the back of your new RECON LED 3
rd
Brake Lamp
together with your common O.E. ground.
Vehicle Specific Wiring Instructions are on the Next Page
1
2
4
3