RECON 26417 Bed Rail Light Kit - Manual

Pistol Pete’s Truck Bed Lighting w/Recon Lights
PARTS LIST
#
Description
1 Four 3/16” X 2” toggle bolts
2 Four Fender washers 1.5” x 3/8” (SS)
3 1” wide x 1/8” thick aluminum stock to make brackets
4 Four 3/16” nuts
5 One 8ft section of 1.5” PVC electrical conduit
6 Four Allen head machine screws
7 Four 1” expandable well nuts
8 Toggle switch
9 T-tap for power connection to tow hitch socket
10 Zip ties
11 Rustoleum Textured Paint for plastic
(left over from my Ultimate Fly Rod Transporter mod)
12 RECON BED LIGHT KIT
OPTIONAL EQUIPMENT
13
T12 48" Red Fluorescent Safety Sleeves
14 Pipe coupling for making 2-4 friction rings
All components can be obtained from “Evil Orange” (Home Depot) with the exception of
the optional “nightvision” T12 48” Fluorescent Safety Sleeves obtained from
www.creativelightings.com
Locate mounting points for “light bar”. The 2004 Tundra Double Cab has four (4) pre-
existing holes up underneath the bed rail that allow toggle bolt insertion to hang a bolt
from and allow attachment. All my mods I try NOT to alter the truck so that they are
reversible if someone wishes to sell the truck.