Ransburg Evolver Water Applicator 78863-90, 78863-60 - Manual (Page 40)

36
Robot Waterbase Applicator - Maintenance
Electrical
General Problem Possible Causes Corrective Action
1. Cascade not functioning.
1. Exterior of gun contaminated
with conductive material.
1. Cascade failure.
1. Check connection between cascade and
harness (79200-00).
2. Check low voltage cable and harness timing.
Correct as required.
3. Isolation tubes contaminated. Clean and re-
install as required.
4. Fluid hose has pinholled. Replace as required.
5. Cascade bad. Replace as required.
6. Low voltage cable connections wrong at
MicroPak.
7. Low voltage cable bad. Replace as required.
1. Replace gun cover.
2. Clean exterior with a non-polar solvent.
1. Replace as required.
No Electrostics
Low Kv , High µA Output
Low Kv, Low µA Output
AA-03-01.1