Ransburg Evolver Water Applicator 78863-90, 78863-60 - Manual (Page 18)

14
Robot Waterbase Applicator - Installation
Robot Spacer Plate
The robot spacer plate is included with the robot
manifold assembly to increase life of the tubing
bundle. The extra spacing it provides, increases the
bend radius of the tubes and decreases the hose or
cable stress at the connector.
There is only one way the spacer plate may be as-
sembled to the mounting plate. The spacer plate
has an alignment pin that may only engage in one
hole position in the robot mount plate.
79107-00 ABB Robots
78983-00 Fanuc P155, 145 Robots
79131-00 Fanuc P200 Robot
TABLE 2 - SPACER PLATES
Part # Description
Three spacer plates are available for this product, one
for ABB robots and two for Fanuc robots as shown
in Table 2.
Robot Spacer Plate Mounting
Mount the spacer plate to the tube bundle assembly
with scews [6] (7959-24C). Locate the spacer plate
with the robot locating pin away from the robot
mount plate. (See Figure 6)
AA-03-01.1