General Tools and Instruments CMR35 - Manual (Page 14)

Fig. 3. The receiver’s controls, indicators and jacks
ቢ Nameplate
ባ Liquid-crystal display
ቤ POWER button
ብ READ button. Main use is for recalling stored maximum and minimum
measurements. Secondary function (indicated by
▲ stencil at right of button) is for
adjusting settings of clock and alarm
ቦ HOLD MAX-H button. Locks maximum measured value
ቧ MAX. MIN. button. Main use is for entering maximum/minimum measurement
mode. Secondary function (indicated by stencil at right of button) is to change
digits of clock and alarm settings
ቨ ALARM button
ቩ CLOCK SET button
ቪ SEARCH button. Main use is for enabling manual searching. Secondary function
(indicated by MUTE ALARM stencil below button) is to mute setpoint alarms.
ቫ CHANNEL button
ቭ USB jack
ቮ PWR
3V jack. For plugging in external 3VDC power supply
▲
14
RIGHT SIDE
CMR35 Manual FINAL4_020911:awb 2/9/11 11:54 AM Page 14