Fairbanks FB3000 Highway System Application - Manual (Page 85)

Section 8: Service & Maintenance
7/08 85 51188 Rev. 1
8.3. WEIGHT KERNEL ERRORS
The following is a list of error conditions and their file names.
ERROR CONDITION FILE NAME FILE CONTENTS
Calibration Change CalibrationChange_#
(# = Weight used) [Error]
Description=Calibration Change
[Data]
Calibration Wt=#
Cell Motion Error CME_#.ERR
(# = cell number) [Error]
Description=Possibly Dead Cell
[Data]
Cell=#
Float Switch On FloatSwitchOn [Error]
Description=Float Switch On
Scale Behind Zero SBZ_#_t.ERR
(# = Scale)
(t = A if t < 400,
B if wt >= 400 [Error]
Description=Scale Behind Zero
[Data]
Scale=#
Range=A or B
Load Cell Failure LCF_#.ERR
(# = cell number)
[Error]
Description=Load Cell Failure
[Data]
Cell=#
ERROR CONDITION
Section Error SER_#
(# = Section) [Error]
Description=
Sectional Error!
[Data]
Section=#
Scale Trimmed STR.ERR [Error]
Description=Scale Trimmed
Cell Warning Error CWE_#.ERR
(# = cell number) [Error]
Description=Possible Stuck Cell
[Data]
Cell=#
Load Cell Drift LCD_#.ERR
(# = cell number) [Error]
Description=Load Cell Drift
[Data]
Cell=#
8.4. HIGHWAY SYSTEM USER INTERFACE ERRORS
ERROR CONDITION FILE NAME FILE CONTENTS
Data Collection/
Reporting Application
not running DCR.ERR [Type]
Code = DCR