Fairbanks FB3000 Highway System Application - Manual (Page 75)

Section 5: Highway Enforcement Mode
7/08 75 51188 Rev. 1
5.3.1. Basic Weigh Function, Continued
6. Press the Enter button on the external
keyboard.
7. When prompted, select either Print,
Edit , or Cancel.
─ Pressing Print generates a ticket,
outputs the weights to the remote
display, and if so configured, stores
the completed transaction data, and
turns the traffic light to
GREEN .
─ Pressing Edit cycles the program
through the data entry sequences.
─ Pressing Cancel aborts the
transaction and displays the
Weighment Type Selection Screen.
This weighment cycle is complete.
5.3.2. Reweighing a Truck
This option is mostly used when a driver
needs to readjust the truck’s load so the
weight is distributed legally and evenly to all
the axles.
1. After the truck drives onto the scale, and
the Traffic Light is red , press .
2. Enter the Truck/Loop ID .
3. Press Enter on the external keyboard.
─ The axle weight amounts displays.
4. Select Print, Edit or Cancel , as noted
above.
After entering the truck information and
pressing
ENTER , press the Print, Edit or
Cancel button. The transaction is complete.
The Reweigh button is mostly used when a
driver readjusts the load to redistribute the load.
These windows
display while printing.