Fairbanks FB3000 Highway System Application - Manual (Page 73)

7/08 73 51188 Rev. 1
Section 5: Highway Enforcement Mode
5.1. INTRODUCTION
The Highway Enforcement Mode determines if a vehicle and its individual axle
weights are legal, based on configurable weight values.
• This is similar to the Highway System Mode, except a ticket is normally only
printed when a violation occurs
, and the gross and/or axle weight is over the
legal limit. There is no fee associated with such a weighment.
• When a weighment is initiated, programmable data entry prompts appear, if
enabled.
• Following the same cycle of operation, when
no violation has occurred will result in a
weighment ticket with legal weights.
• It is suited specifically for Law
Enforcement Agencies , such as the
State Highway Patrol.
5.2. FURTHER DESCRIPTION
The Highway Enforcement Mode consists of four main applications.
• The Highway System User Interface Application
• The FB3000 Kernel Program
─ The FB3000 Kernel Program controls the setup and calibration of the scales.
─ It also provides weight data to the Highway System User Interface
Application
.
• The Data Collection & Reporting Application
─ The Data Collection & Reporting Application maintains the database
information required by the Highway System User Interface Application.
─ This information includes Completed Transactions, Incomplete
Transactions, Stored Tare Weights, Product Information, Customer
Information
, and the Fee Schedule.
• The Error Notification Program .
─ The Error Notification Application receives error conditions from the Weigh
Kernel application, the Highway System User Interface application, and the
Data Collection & Reporting Application
.
─ It then emails these error condition reports to the designated recipients.