Fairbanks FB3000 Highway System Application - Manual (Page 20)

Section 3: Highway System Mode of Operation
7/08 20 51188 Rev. 1
3.2.3. Automatic and Semi-automatic Weighing
Axle weighing is done Automatically and Semi-automatically on two, three,
or four platforms.
• Automatic Weighing is used when all axles fit on the scale.
─ The weight displays once it is fully stabilized in the Automatic Mode.
─ Press either Weigh, Reweigh, or Multi-axle to continue.
• Semi-Automatic Weighing involves double and triple axles that do not fit on
the scales.
3.2.4. Fee Schedule
The following weighment types are associated with the default Highway System
Mode
Fee Schedule .
•
Weigh
•
Re-weigh
•
Double
•
Re-weigh Double
•
Triple
•
Triple Re-weigh
Tare weights are stored, as well as the following seven, programmable axle weights.
•
Steering
•
Drive
•
Tandem
•
Tandem2
•
Tandem3
•
Tandem4
•
Tandem5
Automatic Weighing
Semi- automatic Weighing