Fairbanks FB3000 Highway System Application - Manual (Page 26)

Section 3: Highway System Mode of Operation
7/08 26 51188 Rev. 1
Definition Window
3.5.3. Threshold Weights
Initial Weight sets the minimum amount the
truck must weigh to display the Weighment
Selection Screen
, and to initiate a weighment.
Final Weight is the value that, when applied to
the front-most scale, causes the traffic light to
automatically turn red.
Enable Weight is used to determine if a truck
has repositioned after an axle selection, so not
to select it twice.
Legal Limits set the maximum Legal amount
for each scale weighment (set locally or by the
State).
Legal Limits Trigger Errors controls
whether or not an error message is deployed
when one or more of the
Legal Limit Values
are exceeded.
Warn Only controls whether or not a print is
allowed if there is a Legal Limits Error .
─ If Warn Only is “Yes” , then a print is
allowed.
─ If “No” , a print is not allowed.
3.5.4. Traffic Light Control
Select YES to Enable the traffic light, and NO
to Disable it.
Control Method sets to AUTOMATIC or
MANUAL (when
Enabled
).
─ The standard Traffic Light Controller
used is p/n
25161Q .
  IMPORTANT  
The Traffic Light Controller MUST BE
connected to COM Port 3.
─ AUTOMATIC weighs the truck(s) once
its weight is stable, without the assistance
from an operator (normal setting).
• MANUAL is used when the operator
presses the Enter button on the external
keyboard to weigh the truck, usually used in
a multi-axle weighment.
+
Toggles between the
setting of
AUTOMATIC
and Manual.