Fairbanks FB3000 Highway System Application - Manual (Page 63)

Section 3: Highway System Mode of Operation
7/08 63 51188 Rev. 1
3.5. OPERATION STEPS
The FB3000 Highway System options
include Weigh and Multi-Axle.
3.5.1. Making a Standard
Weighment
1. The Scale is set at “ 00 ”. If not,
press .
─ The instrument displays the
Idle/Inactivity Screen .
─ The traffic light is GREEN .
2. A truck drives onto the scale. When the
weight on the scale exceeds the Initial
Weight Value
, the display switches from
the Idle/Inactivity Screen to the
Weighment Type selection screen.
─ The instrument waits for the weight on
Section One
of the scale to reach the
Final Weight value.
─ The traffic light turns RED .
3. Press .
4. Edit the fields using a mouse, touch screen
or arrows on the external keyboard.
─ Driver’s Name
─ Truck Color
─ [Current] Weather Conditions
─ Weigh Master (Operator)
─ Trailer Number
NOTE: Entry fields listed above are only
examples. Other input fields may or may not
appear, depending on the page format. Setup
for this is in
Section 3.5.11. Enter all the Truck’s information, then press
ENTER (external keyboard) to print the ticket.
Once the traffic light turns red, press Weigh,
Reweigh or Multiaxle.
The Idle Screen displays as the
Highway Program default screen.