Fairbanks FB3000 Highway System Application - Manual (Page 68)

7/08 68 51188 Rev. 1
Section 4: Inbound/Outbound Weighment Mode
4.1. INTRODUCTION
The Inbound/Outbound Operating Mode allows a vehicle to be weighed
using two options.
• Using the Inbound/Outbound Mode, the truck is weighed twice to get the actual
net weight of the load.
─ One weighment with an empty load, and another with a full load, in any
order.
• Using a Stored Tare Weight, the truck can be weighed once and have its net
weight determined.
4.2. OPERATION STEPS
1. The Scale is set at “ 00 ”. If not, press .
─ The instrument displays the Idle/Inactivity Screen .
─ The traffic light is GREEN .
2. A truck drives onto the scale, and the scale exceeds the Initial Weight value.
─ The instrument then displays the Weigh Screen.
─ The instrument waits for the weight on Section One of the scale to reach the
Final Weight value.
─ The traffic light turns RED .
An Inbound Weighment can be either a full or empty load.
It Is the first weighment of a two-step process.