Fairbanks FB3000 Highway System Application - Manual (Page 66)

Section 3: Highway System Mode of Operation
7/08 66 51188 Rev. 1
3.5.3. Making a Multiaxle Weighment
1. The Scale is set at “ 00 ”.
─ If not, press .
─ The instrument displays the
Idle/Inactivity Screen .
─ The traffic light is GREEN .
2. A truck drives onto the scale, and the
scale exceeds the Initial Weight value.
─ The instrument then displays the
Weigh Screen
.
─ The instrument waits for the weight on Section One of the scale to reach the
Final Weight value.
─ The traffic light turns RED .
─ The Instrument then displays the Weighment Type Selection Screen.
3. Press .
4. Press one of the four buttons:
─ Weigh Double
─ Reweigh Double
─ Weigh Triple
─ Reweigh Triple
5. Click on the three or four Axle Scale
Number Blocks .
─ As the Scale Weighments are
entered, the amounts for each display
in the Totals window.
─ Once all the scale weighments are all
entered, the light turns green and the
truck moves forward.
Click on the truck’s Axle Scale Numbers in
the animation. The chart fills with weighments.
The cab moves forward.