Teledyne LXT-220 - Manual (Page 56)

Appendix LXT-220 DO
Teledyne Analytical Instruments 56
Channel 3 Input:
EX Input from an external 4 to 20mA device
EX1 Input from an external relay contact device
* Sentinel Diagnostic:
DIAG1Sentinel Diagnostic on channel 1
DIAG2Sentinel Diagnostic on channel 2
** Number of 4 to 20 mA Outputs:
1mA One 4 to 20mA Current Output
2mA Two 4 to 20mA Current Outputs
3mA Three 4 to 20mA Current Outputs
4mA Four 4 to 20mA Current Outputs
5mA Five 4 to 20mA Current Outputs
6mA Six 4 to 20mA Current Outputs
Hart
HT Hart protocol option
Type of relay contacts:
SS SOLID STATE 240VAC 3amp
C Form C (SPDT)
Number of relay contacts:
/2 Two relay contacts
/4 Four relay contacts
/6 Six relay contacts
/8 Eight relay contacts
Mounting hardware:
UM Universal mounting plate
PM Panel mounting hardware
HM Handrail mounting plate (including 2” hardware)