Teledyne 2010B - Split architecture thermal conductivity analyzer User Manual

Page 68

Text mode
Original mode

5 Maintenance

Model 2010B

5-4 Part I

Teledyne Analytical Instruments

5.6

Cleaning

If instrument is unmounted at time of cleaning, disconnect the instru-

ment from the power source. Close and latch the front-panel access door.
Clean outside surfaces with a soft cloth dampened slightly with plain clean
water. Do not use any harsh solvents such as paint thinner or benzene.

For mounted instruments, DO NOT wipe the front panel while the

instrument is controlling your process. Clean the front panel as prescribed in
the above paragraph.

5.7

Phone Numbers

Customer Service: (626) 934-1673

Environmental Health and Safety: (626) 961-9221, Extension 1592

Fax: (626) 961-2538

EMERGENCY ONLY: (24-hour pager) 1-800-759-7243

PIN # 1858192