Teledyne 2010B - Split architecture thermal conductivity analyzer - Manual (Page 67)

Thermal Conductivity Analyzer Part I: Control Unit
Part I 5-3 Teledyne Analytical Instruments
Figure 5-1: Removing Fuse Cap and Fuse from Holder
3. Replace fuse by reversing process in step 1.
Remove Power to the instrument before changing fuses.
5.5 Major Internal Components
The Interconnection Panel and the Front Panel PCBs are accessed by
unlatching and swinging open the front door, as described earlier.
WARNING: SEE WARNINGS ON THE TITLE PAGE OF THIS
MANUAL.
The 2010B Control Unit contains the following major components:
• Power Supply
• Preamp and Motherboard with Microcontroller
• Display Board and Displays
5 digit LED meter
2 line, 20 character, alphanumeric, VFD
• Rear Panel Board.