PROLiNK WNR1008 User Manual - Manual (Page 40)

PROLiNK® WNR1008 www.prolink2u.com
Version 1.00 37 English
4. Click on the Properties button. You should then see a screen like
the following.
5. Ensure your TCP/IP settings are correct.
Using DHCP
 To use DHCP, select Obtain an IP address automatically and Obtain DNS server address automatically.
This is the default Windows setting. Using this is recommended. By default, the Wireless Router will act as a
DHCP Server.
 Restart your PC to ensure it obtains an IP address from the Wireless Router.
Using a fixed IP Address ("Use the following IP Address")
If your PC is already configured, check with your network administrator before making the following changes.
 In the Default gateway field, enter the Wireless Router's IP address. Your LAN administrator can advise you
of the IP address they assigned to the Wireless Router.
 If the DNS Server fields are empty, select Use the following DNS server addresses, and enters the DNS
address or addresses provided by your ISP, then click OK.
Checking TCP/IP Settings - Windows Vista
1.
Go to Start  Control Panel  Network and Internet  Network and Sharing Center  Manage Network
Connections  Local Area Connection.
2. Right click the Local Area Connection icon and choose Properties. You should see a screen like the following:
3. Select the Internet Protocol Version 4 (TCP/IPv4) or 6 (TCP/IPv6)
for your network card