PROLiNK WNR1008 User Manual - Manual (Page 31)

PROLiNK® WNR1008 www.prolink2u.com
Version 1.00 28 English
Virtual Server
Item / Function Descriptions / Instructions
Enable Port
Forwarding Check to enable Port Forwarding function.
IP Address Enter the IP address in the field.
Protocol Select the protocol (TCP, UDP or Both) used to the remote system or service.
Port Range For TCP and UDP Services, enter the beginning of the range of port numbers used by the service. If the service uses a
single port number, enter it in both the start and finish fields.
Comment You may key in a description MAC address.
Apply Changes After completing the settings on this page, click Apply Changes button to save the settings.
Reset Click Reset button to restore to default values.
Current Port
Forwarding Table Shows the current Port Forwarding information.
Delete Selected Click Delete Selected button to delete items which are selected.
Delete All Click Delete All button to delete all the items.
Reset Click Reset button to rest.