PROLiNK WNR1008 User Manual - Manual (Page 29)

PROLiNK® WNR1008 www.prolink2u.com
Version 1.00 26 English
Item / Function Descriptions / Instructions
Enable MAC Filtering Check to enable MAC filtering function.
MAC Address
Enter the client MAC address in the field.
Comment You may key in a description MAC address.
Apply Changes After completing the settings on this page, click Apply Changes button to save the settings.
Reset Click Reset button to restore to default values.
Current Filter Table Shows the current MAC filter information.
Delete Selected Click Delete Selected button to delete items which are selected.
Delete All Click Delete All button to delete all the items.
Reset Click Reset button to rest.
Port Filtering Settings
Item / Function Descriptions / Instructions
Enable Port Filtering Check to enable Port Filtering function.
Port Range Enter the beginning of the range of port numbers used by the service. If the service uses a single port number, enter
it in both the start and finish fields.
Protocol Select the protocol (TCP, UDP or Both) used to the remote system or service.
Comment You may key in a description MAC address.
Apply Changes After completing the settings on this page, click Apply Changes button to save the settings.
Reset Click Reset button to restore to default values.
Current Port
Forwarding Table Shows the current Port Forwarding information.
Delete Selected Click Delete Selected button to delete items which are selected.
Delete All Click Delete All button to delete all the items.
Reset Click Reset button to rest.