PROLiNK WNR1008 User Manual - Manual (Page 30)

PROLiNK® WNR1008 www.prolink2u.com
Version 1.00 27 English
IP Filtering
Item / Function Descriptions / Instructions
Enable IP Filtering Check to enable IP filtering function.
Local IP Address Enter the local server’s IP address.
Protocol Select the protocol (TCP, UDP or Both) used to the remote system or service.
Comment You may key in a description for the port range.
Apply Changes After completing the settings on this page, click Apply Changes button to save the settings.
Reset Click Reset button to restore to default values.
Current Filter Table Shows the current IP filter information.
Delete Selected Click Delete Selected button to delete items which are selected.
Delete All Click Delete All button to delete all the items.
Reset Click Reset button to rest.