PROLiNK WNR1008 User Manual - Manual (Page 35)

PROLiNK® WNR1008 www.prolink2u.com
Version 1.00 32 English
Item / Function Descriptions / Instructions
Enable DDNS Check to enable the DDNS function.
Service Provider Select the desired DDNS Service Provider DynDNS, TZO or Oray from the pull-down list.
Domain Name Here shows the domain name of the service provider.
User Name/Email
Enter your email that you registered in service provider website. (You can refer to below Note information to apply a
account form the service provider website.)
Password/Key Enter your passwords that you registered in service provider website. Maximum input is 30 alphanumeric characters
(case sensitive).
Apply Changes After completing the settings on this page, click Apply Changes button to save the settings.
Reset Click Reset button to restore to default values.
Upgrade Firmware
Item / Function Descriptions / Instructions
Firmware Version Here display the latest firmware version.
Select File Click the Browse button to find and open the firmware file (the browser will display to correct file path.)
Upload Click the Upload button to perform.
Reset Click Reset button to restore to default values.
Settings Management
Item / Function Descriptions / Instructions
Save Settings to File Click the Save button to save the current settings file in the PC.
Load Settings form
File Click the Browse button to find and open the previous saved file (the browser will display to correct file path.) Then,
click Upload button to upload the previous file.
Reset Settings to
Default
Click Reset button to set the device back to default settings.