PERKO 0217 User Manual
PERKO Lighting
Cat. Nos 217 Series Bulkhead Light Fixtures
INSTALLATION INSTRUCTIONS
Read all instructions before proceeding.
1).
All wiring should be done by a qualified marine electrician in accordance with A.B.Y.C. Standard E-9* and the U.S. Coast Guard Safety Standards for Boat Electrical
Systems (33 CFR 183)*.
2).
Using the fixture as template, drill holes in the mounting surface for the mounting screws and for passage of the electric leads. Drill for #6 screws for the 217 series
and #8 screws for the 450 series.
3).
Attach supply connections to the pigtail leads on the fixture in accordance with the standards referenced in item No. 1 above.
4).
Fasten fixture to mounting surface using #6 R.H. screws..
* The above referenced standards can be obtained from:
(1).
American Boat and Yacht Council, Inc.
(2).
U.S. Coast Guard
3069 Solomon’s Island Road
Washington, D.C. 20593
Edgewater, Maryland 21037
(or your local C.G. office)
6/03
PERKO, INC.
16490 N.W. 13th Avenue
Miami. FL. 33169-5707
www.perko.com